LED Strip 220V 140 LED/m 20W/m IP67 BRIDGELUX Chip

The 220V 20W/m Bridgelux 50m LED Strip is a professional 50-metre LED strip with direct 220V connection, ideal for lighting long runs with no need for drivers or intermediate power supplies.

General information about 220V 20W/m Bridgelux 50m LED Strip

Its direct 220V operation simplifies installation, cuts costs and allows continuous runs unfeasible with low-voltage strips. Fitted with Bridgelux SMD2835 chips and a density of 140 LEDs per metre, it offers even, dot-free light.

With a flux of 2660 lm/m and a 20W/m draw, it provides bright lighting with an excellent balance of power and efficiency. It is TRIAC dimmable via a conventional dimmer.

Use and application of 220V 20W/m Bridgelux 50m LED Strip

Its IP67 protection makes it suitable for outdoor and damp settings such as gardens, façades, eaves, terraces, pools, jetties and coastal areas.

It resists dust, splashes and prolonged weather exposure, keeping its performance for years.

Key benefits of 220V 20W/m Bridgelux 50m LED Strip

• Direct 220V connection, no intermediate driver.
• 2660 lm/m with 20W/m, Bridgelux SMD2835 chip.
• 140 LED/m, even light with no dots.
• IP67 protection for outdoors.
• TRIAC dimmable with a conventional dimmer.
• 50 m roll, cut every 10 cm.

Featured specifications of 220V 20W/m Bridgelux 50m LED Strip

Voltage: direct 220V; Draw: 20W/m; Flux: 2660 lm/m; Chip: Bridgelux SMD2835; Density: 140 LED/m; Protection: IP67; Dimming: TRIAC; Length: 50 m roll; Cut: every 10 cm; Recommended: aluminium profile for heat dissipation.

Installation and maintenance of 220V 20W/m Bridgelux 50m LED Strip

Connect the strip directly to 220V respecting the cut points (every 10 cm) and electrical regulations; an aluminium profile is recommended for optimal dissipation. Always switch off the power before any work.

It needs no maintenance beyond an occasional clean. Specialised LED lighting distribution in Spain with professional warranty. Estimated delivery in 24h subject to stock availability. Check price and availability here.

Frequently asked questions about 220V 20W/m Bridgelux 50m LED Strip

Does it need a driver? — No, direct 220V connection.

How much light does it give? — 2660 lm/m with 20W/m.

Can it be used outdoors? — Yes, IP67 protection.

Is it dimmable? — Yes, by TRIAC with a conventional dimmer.

Where is it cut? — Every 10 cm.