Surface LED ceiling lights: direct installation without building work on any ceiling with optional sensor

Surface LED ceiling lights are the direct alternative when the ceiling has no false ceiling or plenum for recessed installation. Surface installation without ceiling cut-out eliminates building work and reduces mounting time to minutes. Use the finish and sensor filters to locate the model you need.

When to choose a surface LED ceiling light instead of a recessed one

A surface LED ceiling light mounts directly onto the ceiling without modifying the structure. It is the most practical option when there is no air cavity available or when the renovation needs to be fast and without debris. Also see the comparative post on ceiling lights vs recessed downlights for detailed differences.

Ceilings without false ceiling or plenum

On exposed concrete, beam or smooth plaster ceilings, the surface LED ceiling light without false ceiling is the only mounting option without building work. The luminaire is fixed with two screws to the ceiling and the wiring enters through the central recess in the base. The energy efficiency of these models exceeds 90 lm/W, with sufficient light output for continuously used spaces.

Fast renovations without debris

Replacing an old luminaire with a surface LED ceiling light generates no building waste. The white, black and stainless steel finish of the various models is high quality and allows adaptation to the existing finish without painting or repairing the ceiling. Surface LED lights provide uniform illumination from the first switch-on, with no warm-up time.

Available formats and finishes

The catalogue includes square and circular models in three finishes: white, black and stainless steel. Use the finish filter to narrow the selection according to the installation environment.

White square for modern spaces

The 20W Osram square LED ceiling light in white finish is the most requested model for offices, corridors and work areas. The 30W UGR19 square LED ceiling light adds glare control with a UGR19 value for visual comfort at work, required at workstations with screens. The black square LED ceiling light fits spaces with an industrial or minimalist aesthetic.

Circular stainless steel for kitchens and bathrooms

The slim circular stainless steel LED ceiling light combines IP44 protection for damp areas with a finish resistant to humidity and frequent cleaning. It is the recommended format for kitchens, bathrooms and service areas. The integrated LED light source has a 50,000h Osram chip service life with no need to replace bulbs.

Models with integrated motion detector

Models with an integrated PIR radar sensor switch the light on and off automatically. The price of the surface LED ceiling light with motion sensor varies according to wattage and format. Filter by "with sensor" to see only these models.

Radar sensor for transit areas

The radar detector LED ceiling light uses microwave technology that detects movement through plasterboard walls and ceilings. Unlike PIR, the radar sensor does not require direct line of sight to the user. The community stairwell surface LED ceiling light with radar sensor is the best-selling reference for staircases and garages.

Benefits of the sensor in residential buildings and offices

The motion-detecting sensor generates real energy savings in intermittently used transit areas. In communal staircases, the light stays on only while there is presence. Integrated motion detectors eliminate the need to install an external detector, reducing the total installation cost.

Selectable CCT and UGR19 for offices

The selectable colour temperature CCT allows choosing between warm white (3000 K), neutral white (4000 K), cool white (6500 K) and white light. The selection is made before closing the installation. The surface CCT LED ceiling light and the office surface LED ceiling light include this function as standard. The correlated colour temperatures cover the three most common usage ranges without changing the model.

The CRI 92 colour rendering, also expressed as IRC 92 colour rendering index, ensures that colours are perceived accurately. This value is relevant in retail, clinics and any space where the colour of the product or environment is a deciding factor. The 20W neutral white 4000K LED ceiling light is the most requested colour temperature in offices and work areas.

The slim ceiling light thickness dimension of these models stays below 5 cm. The low profile is maintained even when installed on a smooth ceiling. Integrated dimmable output is available on selected models to adapt the perceived natural light according to the time of day.

Installation in under 15 minutes

Surface installation without ceiling cut-out is completed in three steps:

1. Fix the base to the ceiling with two or four screws.
2. Connect the live and neutral wires to the driver terminal block.
3. Fit the cover and check the light switches on.

No specialist tool is required. The IP44 bathroom surface LED ceiling light follows the same process, with the precaution of sealing the cable entry with a cable gland if the area is damp.

Purchasing a surface LED ceiling light in this category includes delivery within 24–48h. Check the surface LED ceiling light price and the motion sensor LED ceiling light price on each product page. For ceilings with an available false ceiling, see the slim extraflat LED downlights as a recessed installation alternative.

Frequently asked questions

How is a surface LED ceiling light installed on the ceiling?

The base is fixed with two or four screws directly to the ceiling. The live and neutral wires are connected to the driver terminal block. The cover is fitted and the light is checked. No false ceiling or prior cut-out is required.

Which LED ceiling light has an integrated motion sensor?

The 20W circular LED ceiling light with motion detector models and the square models with integrated PIR radar sensor include the detector inside the luminaire itself. They do not require an external detector. Filter by "with sensor" in the category to see all available references.

Do surface LED ceiling lights have selectable CCT?

Models with selectable colour temperature CCT allow choosing between 3000 K, 4000 K and 6500 K before final mounting. The selection is made with a selector on the driver. Not all models include this function: check the technical datasheet of each reference.

Can I install a LED ceiling light in a bathroom?

Yes, with models that have IP44 damp area protection or higher. The IP44 bathroom surface LED ceiling light is certified for zones 2 and 3 according to bathroom installation regulations. Check the IP protection rating in the datasheet before installing in areas with water projection.

Which ceiling light finish is best for a communal staircase?

The white, black or stainless steel finish depends on the finish of the space. For communal staircases with white walls, the white model is the most common. If the staircase has metal elements or a more considered design, stainless steel fits better. In all cases, models with a radar sensor reduce consumption in transit areas.