LED track lighting: single-phase and three-phase spotlights with CRI 98 and selectable CCT for shops and stores

LED track lighting solves the light in a shop with a live current profile. The spotlights clip onto that profile and move when the window display changes. LED technology covers a wide range of single-phase and three-phase models from 3 to 40 W, with GU10 lampholder or integrated module, optics from 24 to 100 degrees and a black or white LED track spotlight finish.

Single-phase LED track spotlights for flexible installations

The single-phase track carries a single circuit, so every spotlight switches on at once. This is the usual choice in commercial spaces under 100 square metres. The single-phase LED track spotlight price starts at 3.22 euros with the EMMEN GU10 models.

Track installation allows flexible repositioning without building work. You loosen the adapter, slide the spotlight and lock it at the new point, without breaking into the ceiling.

Models available from 30W to 40W

The types of spotlights run from the 30w paris LED track spotlight, with 24 degree optics and UGR11, to the 40w bridgelux LED track spotlight in the GRAZ series. In between are the 30 W PARMA and the 40 W NEW MAYA, both with a high quality chip.

CRI 92 and CRI 98 depending on the application

The colour rendering index decides whether a fabric looks its real colour. With CRI 92 98 textiles and food are the sectors where it shows most, because reds lose saturation below 90. The cri98 LED track spotlight in the UPPSALA series carries a Philips chip.

For an LED track spotlight for clothing and jewellery it is best not to go below CRI 92. In a stockroom, CRI 82 does the job.

Three-phase LED track spotlights for more power

The three-phase track carries three independent circuits in the same profile. Each point of light is assigned to one of them by turning the adapter, so the window, the fitting rooms and the till stay on separate switches. The three-phase LED track spotlight for shops takes over above 150 square metres.

Advantages of three-phase in large shops

Splitting the load across three circuits lets you hang more luminaires on one line. The high output LED track spotlight in the NEW MAYA series gives 5600 lumens at 40 W, enough for 4 metre ceilings, and the ugr13 LED track spotlight controls glare in long aisles.

Compatibility with existing three-phase tracks

The three-phase adapter follows the European four contact standard and fits lighting systems from other brands already installed. The single-phase and three-phase track difference is in the conductors inside the profile, not in the fixing. Track supply over 1 and 2 metres is solved with side feed connectors, the whole range carries CE certification for indoor track and the complete LED track lighting kit adds joints and an end cap.

Selectable CCT in a single spotlight

The 3CCT models carry a microswitch that moves from 3000K warm light to 4000K neutral light and 5700K without dismantling anything. A selectable cct LED track spotlight lets you correct the tone within that temperature range. The selectable 3CCT colour temperature helps where textiles and food share a room.

Low UGR for spaces without glare

The UGR glare control measures the visual discomfort produced by the light source. Below 19 visual comfort allows work areas and below 13 it is barely noticed. The 24 to 36 degree beam angle concentrates the beam on the product. The 360 adjustable LED track spotlight turns and tilts to aim it at the display case.

DALI and 1-10V dimming available

DALI and 1-10V track dimming is fitted on an external driver and adjusts the level per circuit. A dali dimmable LED track spotlight drops to 10 per cent without flicker. Each model sheet states the protocol accepted and the declared service life.

Applications by retail sector

In fashion, high CRI and a narrow beam rule. The graz black bridgelux LED track spotlight goes over rails because the high output Bridgelux chip keeps the luminous flux steady. In food the colour temperature weighs more and in jewellery, accent lighting with a narrow angle. In lighting projects, to buy LED track spotlights, settle the product type and the system first, and the optics afterwards.

Complete the installation with the single-phase LED track accessories and compare the options in LED accent lighting.

Frequently asked questions about LED track lighting

What is the difference between a single-phase and a three-phase LED track spotlight?

The single-phase uses one circuit and switches every spotlight on together. The three-phase carries three circuits in the same profile and switches groups separately. The adapter is different, so a three-phase spotlight does not fit a single-phase track.

What CRI do I need for a clothing shop?

CRI 92 is the sensible minimum, because below 90 reds go flat. For premium fashion, CRI 98 reproduces the fabric as daylight would.

Are LED track spotlights dimmable?

Only those that say so on the product sheet. Dimming is done with an external DALI or 1-10V driver and reaches 10 per cent of the flux.

Can I mix spotlights of different powers on the same track?

Yes, as long as the total does not exceed the circuit load. A 2 metre track takes around 1000 W, well above twelve 40 W spotlights. Spread the higher powers so the light stays even.

Which beam angle is best for lighting a product in a display case?

Between 24 and 36 degrees. That beam covers a mannequin without spilling light into the aisle and increases contrast. To wash a wall it is better to go up to 60 degrees.