Single-phase LED track accessories: tracks, connectors and suspension kits for a complete installation

Single phase LED track accessories definitively complete a spotlight installation, bringing together profiles, connectors, suspension kits, lampholders and end caps, with a white black silver finish. White is the most discreet colour on a false ceiling.

Types of single phase track available

The reinforced single phase track profile incorporates a single circuit and all the spotlights switch on simultaneously, so that the single phase system proves the most common in small premises. The LED track for spotlights price depends on the finish and the length, and the cuttable 1 to 2 metre length adjusts the final section on site.

Reinforced 1 metre track

The short section proves suitable in window displays and islands, because the one metre reinforced single phase LED track is suspended by means of two brackets and takes up to six GU10 spotlights with no appreciable bending.

Reinforced 2 metre track

The long section considerably reduces joints and the 2 metre reinforced track price per metre proves more advantageous, whereas the single phase track 1 metre 2 metre price is compared on each datasheet. The LED track ceiling bracket is placed every 80 centimetres.

Connectors to extend and branch the track

The I L T type LED track connector resolves the three possible cases, continuing straight, turning or opening a branch, whereas the LED track starting connector closes the end and conducts the current. The flexible single phase track joiner covers the angles that are not 90 degrees.

Type I connector for a straight joint

The straight type I joint connector unites two sections in line and maintains electrical continuity.

Type L connector for 90 degree corners

The 90 degree corner type L connector redirects the run to follow a wall, so that an angular single phase track connector avoids cutting the profile at a mitre.

Type T connector for branches

The type T track branch connector opens a branch to cover a fitting room with no need for an independent line. The flexible direction change joiner constitutes the alternative when the turn does not prove straight.

Pendant kit for suspended track spotlights

The LED track spotlight pendant kit lowers the profile when the ceiling proves high, and the steel cable suspension pendant kit includes one metre of cable together with the fixings. The pendant LED track suspension kit serves in commercial premises.

GU10 lampholder spotlights for track

The white black GU10 track spotlight constitutes the empty body where the bulb is screwed in. It allows the lamp to be replaced without replacing the whole luminaire.

How to plan a complete track system

Measure the complete run and determine where the cable enters. Add up the sections, one starting connector, the angles and one end cap. The LED track end cap closes the end and the track end closing cap prevents dust from entering. These lighting systems mount a high quality profile.

The LED track installation accessory that is most frequently forgotten is precisely the cap. Single phase track installation accessories are requested together with the spotlights.

Choose the LED track spotlights first and check the three phase track accessories if your system carries three circuits.

Frequently asked questions about single phase track accessories

How many metres of track can I connect in series?

Up to around eight metres with a single feed, if the sum of the powers does not exceed the load of the circuit. With a longer run it is worth adding a second starting connector.

Are I L T type connectors universal for all tracks?

They fit single phase profiles of the same two pole format. The track spotlight brand compatibility is worth reviewing, because some manufacturers use their own section.

Can I hang the LED track from the ceiling with a suspension kit?

Yes. The kit carries one metre of steel cable and supports the weight of the profile with its spotlights. It is fixed to the slab and lowers the luminaire.

What length of track do I need for my shop?

As a reference, one metre of track for every three or four 30 W spotlights. In a 60 square metre shop six metres in two lines are enough.

Are GU10 track spotlights compatible with the reinforced track?

Yes, the adapter is the standard single phase two pole one. The GU10 lampholder takes bulbs of up to 10 W.