COB LED Strip 220V 240 LED/m 10W/m 50m IP65

The COB 220V IP65 LED Strip is a linear lighting solution for large runs, with uniform, continuous light and no visible dots. Its flexible silicone build and IP65 rating make it suitable for façades, ceilings, shop windows, gardens and architectural spaces, indoors and outdoors.

General information about COB 220V IP65 LED Strip

The 240 LEDs per metre with COB Flip Chip technology generate a homogeneous beam, with no shadows or dotted effect. The 10W per metre consumption and an approximate flux of 1120 lm/m provide balanced lighting for residential, commercial and architectural settings.

Running directly on 220V, it needs no external transformer, simplifying assembly and allowing long runs on a single line.

Use and application of COB 220V IP65 LED Strip

It is ideal for façades, ceilings, shop windows, gardens and architectural spaces, both indoors and outdoors.

The 50-metre roll allows cuts every 10 cm to suit the exact length of each installation.

Key benefits of COB 220V IP65 LED Strip

• COB Flip Chip, 240 LEDs/m, dot-free light.
• 10W/m and approximate flux of 1120 lm/m.
• Direct 220V connection, no transformer.
• 50 m roll, cuts every 10 cm.
• Flexible silicone with IP65 rating.
• Rear adhesive for quick fixing.

Featured specifications of COB 220V IP65 LED Strip

Technology: COB Flip Chip; Density: 240 LEDs/m; Consumption: 10W/m; Flux: ~1120 lm/m; Voltage: 220V (direct, no transformer); Protection: IP65; Material: flexible silicone; Length: 50 m roll, cut every 10 cm; Fixing: rear adhesive.

Installation and maintenance of COB 220V IP65 LED Strip

Cut the strip at the marked points every 10 cm, fix it with the rear adhesive on a clean, flat surface and connect it to 220V in line with electrical regulations. To optimise heat dissipation, installing it inside an aluminium profile is recommended. Always switch off the power before any work.

The silicone cover prevents yellowing over time and protects the LEDs against moisture and dust. Specialised LED lighting distribution in Spain with professional warranty. Estimated delivery in 24h subject to stock availability. Check price and availability here.

Frequently asked questions about COB 220V IP65 LED Strip

Does it need a transformer? — No, it connects directly to 220V.

How much does it consume? — 10W per metre (~1120 lm/m).

Where can it be cut? — Every 10 cm.

What length does it come in? — A 50 m roll.

Is it suitable for outdoors? — Yes, IP65 in flexible silicone.