24V LED strip | 182xLED / M | 5m | SMD2835 | 11200lm | 16w / m | Ip20

Is 24V LED strip DC 180xLED / M Ip20 It has a length of 5 meters and integrate 238 LED SMD2835 high efficiency that only consume 16W per meter. The bright and colorful light that emits is distributed at an angle of 120º.

Our led strip is self-adhesive To facilitate its installation. The LED strip requires a direct current power supply (DC) to feed it.

The LED strip It can be cut and joined by the spaces indicated in the same (union copper zone), always following the relevant instructions, (be careful that the welder hold a brief contact with the strip when welding it, since the excessive heat would damage the driver).

It is recommended that any type of installation of this type does not exceed 10 meters to avoid voltage drops from the direct current that feeds the LED strips, although you also have the option to feed the strip at both ends, option more recommendable if you are placed 20 continuous meters. For the installation of more continuous meters, you will need the installation of signal amplifiers for the LED strip.

In its placement, to increase the life of the LED strip, it is Recommended using the double-sided thermal dissipation tape, as well as placing it on aluminum profile, For a correct heat management of the same LED strip.

You can find on our website both signal amplifiers, as a dissipatory tape, join accessories, power supplies of 24v, as well as aluminum profiles.

The LED strips are ideal for illuminating any type of corner or element of your business and your home, thanks to its flexibility. It can be said that one of its main advantages is the great versatility of uses that can be given, since they can be installed in any area and adapt to any corner, and thus be placed in any position, by its linear customizable design.

Uses of the 24V LED strip - Professional - 180xLED / M | 5m | SMD2835 | 11200lm | 16w / m | Ip20

• In libraries
• Bars
• Home
• Restaurants
• Covered