.svg){kind=small}
Three-phase LED track accessories: tracks, connectors and joints for high performance professional installations
There are 6 products.
Showing 1-6 of 6 item(s)
Three-phase LED track accessories turn loose spotlights into a system. Here you have the reinforced profiles, the feed connectors, the flexible joints and the end caps, in the same black and white finish available on the spotlights.
Types of three-phase track available
The three-phase three circuit track carries four conductors, three phases and neutral. Each spotlight is assigned to a phase by turning the adapter. One run switches areas separately. The three-phase track for LED spotlights in this range is reinforced and does not sag between supports.
The three-phase track price for 1 and 2 metres runs from 13.00 to 21.47 euros, with the 1 and 2 metre length cuttable on site. The high quality aluminium profile adapts to uneven ceilings and extends the service life. This type of product needs that in continuous use.
One metre three-phase track in black and white
The one metre run is the easiest to handle in windows and islands. The black and white three-phase track covers both finishes, black for dark ceilings and white for light false ceilings.
Two metre three-phase track for long installations
The two metre run cuts joints in aisles. The reinforced three-phase track price per metre works out better. The three-phase track ceiling bracket goes in every 80 centimetres.
Feed connectors and side supply
The three-phase track feed connector closes the end and brings in the current. This side supply feed connector enters from one side and the cable stays out of sight.
Left feed connector
The left three-phase track feed connector is used when the supply arrives from the left. The polarity means the side has to be respected, because the earth runs in a fixed channel.
Right feed connector
The left or right three-phase connector is chosen according to where the cable comes in. Fitting it the wrong way round reverses the phase order and scrambles the groups.
Flexible joints for changes of direction
The flexible three-phase track joint links two runs at a free angle, to go around a column. The change of direction flexible joint keeps the three circuits separate through the turn.
The flexible three-phase LED joint costs 8.18 euros and carries the same four pole contact.
Differences between single-phase and three-phase track
The single-phase carries one circuit and switches every spotlight on at once. The three-phase splits the load in three. The 230V independent circuit voltage assigns window, fitting rooms and till to different switches.
The single-phase system is enough in small commercial spaces and the three-phase system lets you split the switching over large floors. The total three-phase track power is the sum of the three circuits, so one run supports more points of light. The whole range carries CE certification for indoor three-phase track.
How to plan a complete three-phase installation
Three-phase track LED spotlights for shops are planned by switching groups. Three-phase track accessories let you extend the line without redoing the electrical installation. The type of installation decides how many pieces are needed. Measure the run and add up the sections, one feed connector, the joints and an end cap. The three-phase track installation accessory people forget most is the end cap.
| Component | Function | Guide quantity |
| Reinforced track | Support and conduction | By metres |
| Feed connector | Current input | 1 per line |
| Straight I connector | Joint between runs | 1 per joint |
| Flexible joint | Change of direction | 1 per turn |
| End cap | End closure | 1 per line |
The complete three-phase track kit groups those pieces for a professional three-phase installation. Three-phase track installation accessories are ordered together with the spotlights.
The product description carries the measurements and finishes. The images are purely illustrative and may vary in sizes, colours or textures according to the customer's visual perception. If a customer has a doubt about sizes or colours it is best to check the technical sheet or write by email.
See the compatible LED track spotlights and the single-phase LED track accessories if your system runs on one circuit.
Frequently asked questions about three-phase track accessories
What is the difference between three-phase and single-phase track?
The three-phase carries three circuits in the same profile and the single-phase only one. That allows groups to be switched separately without new lines. The adapters are not interchangeable.
Are three-phase feed connectors universal?
They follow the European four contact standard and fit most profiles. It is worth checking the brand of the track, because some manufacturers use a section of their own.
How many spotlights can I connect on a 2 metre three-phase track?
It depends on the power of the spotlight and the split between circuits. With 40 W spotlights over three phases, a two metre run takes between ten and twelve points.
Can I mix black and white track in the same installation?
Electrically yes, the inner profile is identical. The black and white three-phase track finish only changes the outside appearance. The mix shows but does not affect operation.
Is the flexible three-phase joint compatible with every track?
It is compatible with four pole three-phase profiles of the same format. Compatibility with the brand of three-phase spotlights is worth checking if the track is more than ten years old.