LED Strip 220V 10W/m 120LED/m IP65 2700K Cut to Size

The 10W 220V LED Strip is a mains-direct strip, ready to install without a transformer, with IP65 protection and cut-to-measure every metre to suit any linear lighting project.

General information about 10W 220V LED Strip

It runs directly on 220-240V with a 10W-per-metre draw and 120 LEDs/m using SMD 2835 chips, delivering a real efficacy of 100 lm/W (around 1,000 lm/m) in a warm 2700K tone.

Its wide 300° angle spreads the light all around, and it is dimmable via a TRIAC dimmer. The IP65 rating allows installation in damp areas and even in sheltered outdoor spots.

Use and application of 10W 220V LED Strip

It is ideal for decorative and perimeter lighting of ceilings, cornices, shop windows, façades, gardens, terraces and retail premises, where its direct 220V connection simplifies installation over long runs.

It is cut to measure every metre along the marked points, fitting the required length precisely without wasting material.

Key benefits of 10W 220V LED Strip

• Direct 220-240V connection, no transformer.
• 10W/m with 120 LEDs/m SMD 2835 and 100 lm/W efficacy.
• Dimmable with a TRIAC dimmer.
• IP65 protection for damp areas and sheltered outdoors.
• Cut to measure every metre and a 300° angle.
• 30,000-hour service life and a 2-year warranty.

Featured specifications of 10W 220V LED Strip

Power: 10W/m; Voltage: 220-240V AC; LEDs: 120 LEDs/m SMD 2835; Real efficacy: 100 lm/W; Colour temperature: 2700K; Angle: 300°; Dimming: TRIAC dimmer; Protection: IP65; Service life: 30,000 h; Cut size: 1000×13×6 mm; Material: ABS + PCB; Certifications: CE; Warranty: 2 years.

Installation and maintenance of 10W 220V LED Strip

Connect the strip to the 220V mains with the matching sealed connector, respecting polarity and the maximum length per run. Cut only along the marked points and always switch off the power before any work.

It needs hardly any maintenance; just clean the profile or surface periodically. Specialised LED lighting distribution in Spain, with CE certification and a professional 2-year warranty. Estimated delivery in 24h subject to stock availability. Check price and availability here.

Frequently asked questions about 10W 220V LED Strip

Does it need a transformer? — No, it connects directly to 220-240V.

Can it be cut? — Yes, to measure every metre along the marked points.

Is it dimmable? — Yes, with a TRIAC dimmer.

Is it suitable for outdoors? — Yes, IP65, for damp areas and sheltered outdoors.

What warranty does it carry? — 2 years.